rajni gupta
Forum Replies Created
-
AuthorPosts
-
March 30, 2016 at 4:58 am in reply to: How to create Header and footer with VB.net in Open XML Word document #3305
Yes this is happening in my case.I am writting code in VB.net.So first I am opening word document in SDK 2.0.From SDK I am generating code.But when I am writing the same code in VB.net, footer is not showing.
You are using some other way for Open XML generation and I am using some other way.
Well you are a Master In Open XML and I am beginner.
May be I am not able to tell you my exact problem but anyways thanks a lot.I consumed your lot of times.
Thank you so much.March 28, 2016 at 9:47 am in reply to: How to create Header and footer with VB.net in Open XML Word document #3287NO you are not getting my point I am saying that the code which I am generating is not showing footer reference in section property.Yes I used Open XML SDK 2.5 for code generation.
Visual Studio Package Editor PowerTool is new for me.I have not used this tool previously and I am not aware about that.March 28, 2016 at 7:26 am in reply to: How to create Header and footer with VB.net in Open XML Word document #3283Actually the code which I am using, is generating this footer Code
<w:sectPr w:rsidRPr=”00A242E6″ w:rsidR=”00A242E6″>
<w:pgSz w:w=”12240″ w:h=”15840″ />
<w:pgMar w:top=”1440″ w:right=”1440″ w:bottom=”1440″ w:left=”1440″ w:header=”720″ w:footer=”720″ w:gutter=”0″ />
<w:cols w:space=”720″ />
<w:docGrid w:linePitch=”360″ />
</w:sectPr>but in OpenXML SDK it is showing like this
<w:sectPr w:rsidR=”00DD14CB”>
<w:footerReference w:type=”default” r:id=”rId7″ xmlns:r=”http://schemas.openxmlformats.org/officeDocument/2006/relationships” />
<w:pgSz w:w=”12240″ w:h=”15840″ />
<w:pgMar w:top=”1440″ w:right=”1440″ w:bottom=”1440″ w:left=”1440″ w:header=”720″ w:footer=”720″ w:gutter=”0″ />
<w:cols w:space=”720″ />
<w:docGrid w:linePitch=”360″ />
</w:sectPr>So I am not getting how I can code this.
March 24, 2016 at 5:46 am in reply to: How to create Header and footer with VB.net in Open XML Word document #3264Hi,
I validated my word document in sdk also but no error message is coming because it showing that there is no validation error.
See the problem is in my code is that the footer reference is not adding.
The code which I integrated is like this<w:sectPr w:rsidRPr=”00A242E6″ w:rsidR=”00A242E6″>
<w:pgSz w:w=”12240″ w:h=”15840″ />
<w:pgMar w:top=”1440″ w:right=”1440″ w:bottom=”1440″ w:left=”1440″ w:header=”720″ w:footer=”720″ w:gutter=”0″ />
<w:cols w:space=”720″ />
<w:docGrid w:linePitch=”360″ />
</w:sectPr>
but it should be like this<w:sectPr w:rsidR=”00DD14CB”>
<w:footerReference w:type=”default” r:id=”rId7″ xmlns:r=”http://schemas.openxmlformats.org/officeDocument/2006/relationships” />
<w:pgSz w:w=”12240″ w:h=”15840″ />
<w:pgMar w:top=”1440″ w:right=”1440″ w:bottom=”1440″ w:left=”1440″ w:header=”720″ w:footer=”720″ w:gutter=”0″ />
<w:cols w:space=”720″ />
<w:docGrid w:linePitch=”360″ />
</w:sectPr>But I am not getting what is missing in this code.I hope now you got my point, means what I want to say.
I saw all contents related to header and footer from your blog as well as from other links also.
If you will help, I will be very greatful.March 23, 2016 at 7:23 am in reply to: How to create Header and footer with VB.net in Open XML Word document #3251Hi Eric,
Thanks for your reply but I checked all the links and I checked my XML also.The XML is as following:
I am not getting any help from anywhere.
So please help me.<w:body xmlns:w=”http://schemas.openxmlformats.org/wordprocessingml/2006/main”>
<w:p w:rsidr=”001F0702″ w:rsidp=”00500849″ w:rsidrdefault=”001F0702″>
<w:ppr>
<w:tabs>
<w:tab w:val=”center” w:pos=”1080″ />
</w:tabs>
<w:ind w:left=”1170″ w:right=”360″ />
</w:ppr>
</w:p>
<w:p w:rsidr=”001F0702″ w:rsidrdefault=”001F0702″>
<w:r>
<w:br w:type=”page” />
</w:r>
<w:bookmarkstart w:name=”_GoBack” w:id=”0″ />
<w:bookmarkend w:id=”0″ />
</w:p>
<w:p w:rsidr=”004F1932″ w:rsidp=”00F6695D” w:rsidrdefault=”00A242E6″>
<w:r>
<w:lastrenderedpagebreak />
<w:t xml:space=”preserve”>
</w:t>
</w:r>
</w:p>
<w:p w:rsidr=”00A242E6″ w:rsidp=”00F6695D” w:rsidrdefault=”00A242E6″ />
<w:p w:rsidr=”00A242E6″ w:rsidp=”00F6695D” w:rsidrdefault=”00A242E6″ />
<w:p w:rsidr=”00A242E6″ w:rsidp=”00F6695D” w:rsidrdefault=”00A242E6″ />
<w:p w:rsidr=”00A242E6″ w:rsidp=”00F6695D” w:rsidrdefault=”00A242E6″ />
<w:p w:rsidr=”00A242E6″ w:rsidp=”00F6695D” w:rsidrdefault=”00A242E6″ />
<w:p w:rsidr=”00A242E6″ w:rsidp=”00F6695D” w:rsidrdefault=”00A242E6″ />
<w:p w:rsidr=”00A242E6″ w:rsidp=”00F6695D” w:rsidrdefault=”00A242E6″ />
<w:p w:rsidr=”00A242E6″ w:rsidp=”00F6695D” w:rsidrdefault=”00A242E6″ />
<w:p w:rsidr=”00A242E6″ w:rsidp=”00F6695D” w:rsidrdefault=”00A242E6″ />
<w:p w:rsidr=”00A242E6″ w:rsidrdefault=”00A242E6″>
<w:r>
<w:br w:type=”page” />
</w:r>
</w:p>
<w:p w:rsidr=”00A242E6″ w:rsidp=”00F6695D” w:rsidrdefault=”00A242E6″ />
<w:p w:rsidrpr=”00A242E6″ w:rsidr=”00A242E6″ w:rsidp=”00A242E6″ w:rsidrdefault=”00A242E6″ />
<w:p w:rsidr=”00A242E6″ w:rsidp=”00A242E6″ w:rsidrdefault=”00A242E6″ />
<w:p w:rsidrpr=”00A242E6″ w:rsidr=”00A242E6″ w:rsidp=”00A242E6″ w:rsidrdefault=”00A242E6″>
<w:ppr>
<w:tabs>
<w:tab w:val=”left” w:pos=”6371″ />
</w:tabs>
</w:ppr>
<w:r>
<w:tab />
</w:r>
</w:p>
<w:sectpr w:rsidrpr=”00A242E6″ w:rsidr=”00A242E6″ w:rsidsect=”00500849″>
<w:headerreference w:type=”default” r:id=”rId8″ xmlns:r=”http://schemas.openxmlformats.org/officeDocument/2006/relationships” />
<w:footerreference w:type=”default” r:id=”rId9″ xmlns:r=”http://schemas.openxmlformats.org/officeDocument/2006/relationships” />
<w:pgsz w:w=”12240″ w:h=”15840″ />
<w:pgmar w:top=”1440″ w:right=”1440″ w:bottom=”1440″ w:left=”1530″ w:header=”720″
w:footer=”720″ w:gutter=”0″ />
<w:cols w:space=”720″ />
<w:docgrid w:linepitch=”360″ />
</w:sectpr>
</w:body>March 22, 2016 at 7:26 am in reply to: How to create Header and footer with VB.net in Open XML Word document #3231Hi I saw the code about which you was saying but not helpful.I integrated the following code.
can you help me.Private Sub CommonK()
Try
docFileName = String.Format(“Report_{0}”, “2014-2015”)
docFilePath = Server.MapPath(Path.Combine(WebConfigurationManager.AppSettings(“ReportOutputPath”), docFileName))
wordDoc = OpenXMLHelper.CreateWordProcessingDocument(docFilePath)
mainDocPart = OpenXMLHelper.CreateMainDocumentPart(wordDoc)
‘create the document
document = OpenXMLHelper.CreateDocument(mainDocPart)
‘create the body
body1 = OpenXMLHelper.CreateBody(document)
OpenXMLHelper.CreateBodyProperties(body1, 800, 1440, 1000, 720, 720, 720, 0)
‘===================PREPARE & ADD STYLES INIT=======================
‘create a style definition part.
Dim styleDefPart As StyleDefinitionsPart = OpenXMLHelper.CreateStyleDefinitionPart(mainDocPart)
‘init the styles
Dim styles As Styles = OpenXMLHelper.InitStyles(styleDefPart)
OpenXMLHelper.CreateStyle(styles, “PageNormalStyle”, “Arial”, 5, False, False, “Black”)
OpenXMLHelper.CreateStyle(styles, “AmtItalicStyle”, “Arial Unicode MS”, 14, False, False, “Black”)p = New Paragraph()
p = OpenXMLHelper.CreateParagraphWithNewLine(MyEncoder.HtmlEncode(Session(“DemandName”)), JustificationValues.Center)
body1.Append(p)p1 = New Paragraph()
r = New Run(New Text(“Ministry Name”))
p_prp = OpenXMLHelper.CreateParagraphProperties(p1, “BoldStyle”, JustificationValues.Center, 0)
p1.Append(r)
body1.Append(p1)p = OpenXMLHelper.CreateParagraphWithNewLine(MyEncoder.HtmlEncode(“A. The Budget allocations, net of recoveries, are given below: “), JustificationValues.Left)
body1.Append(p)p = OpenXMLHelper.CreateParagraphWithNewLine(MyEncoder.HtmlEncode(” “), JustificationValues.Left)
body1.Append(p)
‘From Here‘Put Data here
‘Dim footnotes1 As New Footnotes()
‘footnotes1.MCAttributes = New MarkupCompatibilityAttributes()
” footnotes1.Ignorable = “w14 wp14”‘Dim footnote1 As New Footnote()
‘footnote1.Type = FootnoteEndnoteValues.Separator
‘footnote1.Id = -1Dim paragraph1 As New Paragraph()
paragraph1.RsidParagraphAddition = “004F1932”
paragraph1.RsidParagraphProperties = “00F6695D”
paragraph1.RsidRunAdditionDefault = “00A242E6”Dim run1 As New Run()
Dim text1 As New Text()
text1.Space = SpaceProcessingModeValues.Preserve
text1.Text = “National”
run1.Append(text1)
paragraph1.Append(run1)
‘footnote1.Append(paragraph1)
‘footnotes1.Append(footnote1)Dim paragraph2 As New Paragraph()
paragraph2.RsidParagraphAddition = “00A242E6”
paragraph2.RsidParagraphProperties = “00F6695D”
paragraph2.RsidRunAdditionDefault = “00A242E6”Dim paragraph3 As New Paragraph()
paragraph3.RsidParagraphAddition = “00A242E6”
paragraph3.RsidParagraphProperties = “00F6695D”
paragraph3.RsidRunAdditionDefault = “00A242E6”Dim paragraph4 As New Paragraph()
paragraph4.RsidParagraphAddition = “00A242E6”
paragraph4.RsidParagraphProperties = “00F6695D”
paragraph4.RsidRunAdditionDefault = “00A242E6”Dim paragraph5 As New Paragraph()
paragraph5.RsidParagraphAddition = “00A242E6”
paragraph5.RsidParagraphProperties = “00F6695D”
paragraph5.RsidRunAdditionDefault = “00A242E6”Dim paragraph6 As New Paragraph()
paragraph6.RsidParagraphAddition = “00A242E6”
paragraph6.RsidParagraphProperties = “00F6695D”
paragraph6.RsidRunAdditionDefault = “00A242E6”Dim paragraph7 As New Paragraph()
paragraph7.RsidParagraphAddition = “00A242E6”
paragraph7.RsidParagraphProperties = “00F6695D”
paragraph7.RsidRunAdditionDefault = “00A242E6”Dim paragraph8 As New Paragraph()
paragraph8.RsidParagraphAddition = “00A242E6”
paragraph8.RsidParagraphProperties = “00F6695D”
paragraph8.RsidRunAdditionDefault = “00A242E6”Dim paragraph9 As New Paragraph()
paragraph9.RsidParagraphAddition = “00A242E6”
paragraph9.RsidParagraphProperties = “00F6695D”
paragraph9.RsidRunAdditionDefault = “00A242E6”Dim paragraph10 As New Paragraph()
paragraph10.RsidParagraphAddition = “00A242E6”
paragraph10.RsidParagraphProperties = “00F6695D”
paragraph10.RsidRunAdditionDefault = “00A242E6”Dim paragraph11 As New Paragraph()
paragraph11.RsidParagraphAddition = “00A242E6”
paragraph11.RsidRunAdditionDefault = “00A242E6”Dim run2 As New Run()
Dim break1 As New Break()
break1.Type = BreakValues.Pagerun2.Append(break1)
paragraph11.Append(run2)
Dim paragraph12 As New Paragraph()
paragraph12.RsidParagraphAddition = “00A242E6”
paragraph12.RsidParagraphProperties = “00F6695D”
paragraph12.RsidRunAdditionDefault = “00A242E6”Dim paragraph13 As New Paragraph()
paragraph13.RsidParagraphMarkRevision = “00A242E6”
paragraph13.RsidParagraphAddition = “00A242E6”
paragraph13.RsidParagraphProperties = “00A242E6”
paragraph13.RsidRunAdditionDefault = “00A242E6”Dim paragraph14 As New Paragraph()
paragraph14.RsidParagraphAddition = “00A242E6”
paragraph14.RsidParagraphProperties = “00A242E6”
paragraph14.RsidRunAdditionDefault = “00A242E6”Dim paragraph15 As New Paragraph()
paragraph15.RsidParagraphMarkRevision = “00A242E6”
paragraph15.RsidParagraphAddition = “00A242E6”
paragraph15.RsidParagraphProperties = “00A242E6”
paragraph15.RsidRunAdditionDefault = “00A242E6”Dim runrr As New Run()
Dim text2 As New Text()
text2.Space = SpaceProcessingModeValues.Preserve
text2.Text = “NIc”
runrr.Append(text2)Dim paragraphProperties1 As New ParagraphProperties()
Dim tabs1 As New Tabs()
Dim tabStop1 As New TabStop()
tabStop1.Val = TabStopValues.Left
tabStop1.Position = 6371
tabs1.Append(tabStop1)paragraphProperties1.Append(tabs1)
Dim run3 As New Run()
Dim tabChar1 As New TabChar()run3.Append(tabChar1)
Dim bookmarkStart1 As New BookmarkStart()
bookmarkStart1.Name = “_GoBack”
bookmarkStart1.Id = “0”Dim bookmarkEnd1 As New BookmarkEnd()
bookmarkEnd1.Id = “0”paragraph15.Append(runrr)
paragraph15.Append(paragraphProperties1)
paragraph15.Append(run3)
paragraph15.Append(bookmarkStart1)
paragraph15.Append(bookmarkEnd1)Dim sectionProperties1 As New SectionProperties()
sectionProperties1.RsidRPr = “00A242E6”
sectionProperties1.RsidR = “00A242E6”Dim footerReference1 As New FooterReference()
footerReference1.Type = HeaderFooterValues.[Default]
footerReference1.Id = “rId7”Dim pageSize1 As New PageSize()
pageSize1.Width = 12240UI
pageSize1.Height = 15840UIDim pageMargin1 As New PageMargin()
pageMargin1.Top = 1440
pageMargin1.Right = 1440UI
pageMargin1.Bottom = 1440
pageMargin1.Left = 1440UI
pageMargin1.Header = 720UI
pageMargin1.Footer = 720UI
pageMargin1.Gutter = 0UIDim columns1 As New Columns()
columns1.Space = “720”Dim docGrid1 As New DocGrid()
docGrid1.LinePitch = 360sectionProperties1.Append(footerReference1)
sectionProperties1.Append(pageSize1)
sectionProperties1.Append(pageMargin1)
sectionProperties1.Append(columns1)
sectionProperties1.Append(docGrid1)‘ body1.Append(footnote1)
body1.Append(paragraph2)
body1.Append(paragraph3)
body1.Append(paragraph4)
body1.Append(paragraph5)
body1.Append(paragraph6)
body1.Append(paragraph7)
body1.Append(paragraph8)
body1.Append(paragraph9)
body1.Append(paragraph10)
body1.Append(paragraph11)
body1.Append(paragraph12)
body1.Append(paragraph13)
body1.Append(paragraph14)
body1.Append(paragraph15)
‘ body1.Append(footnotes1)
body1.Append(sectionProperties1)Catch ex As Exception
Throw ex
End Try‘End Here
‘Dim sectionProperties1 As New SectionProperties()
‘sectionProperties1.RsidRPr = “0075600D”
‘sectionProperties1.RsidR = “006217B2″‘Dim pageSize1 As New PageSize()
”runFonts32.Width = DirectCast(12240UI, UInt32Value)
”runFonts32.Height = DirectCast(15840UI, UInt32Value)‘Dim pageMargin1 As New PageMargin()
‘pageMargin1.Top = 1440
”pageMargin1.Right = DirectCast(1440UI, UInt32Value)
‘pageMargin1.Bottom = 1440
‘pageMargin1.Left = 1440UI
‘pageMargin1.Header = 720UI
‘pageMargin1.Footer = 720UI
‘pageMargin1.Gutter = 0UI‘Dim columns1 As New Columns()
‘columns1.Space = “720”‘Dim docGrid1 As New DocGrid()
‘docGrid1.LinePitch = 360‘sectionProperties1.Append(pageSize1)
‘sectionProperties1.Append(pageMargin1)
‘sectionProperties1.Append(columns1)
‘sectionProperties1.Append(docGrid1)‘body1.Append(sectionProperties1)
‘Return body1document.Save()
wordDoc.Close()HttpContext.Current.Response.ClearContent()
Response.ContentType = “application/vnd.ms-word”
Response.AddHeader(“Content-Disposition”, String.Format(“inline; filename={0}”, docFileName + “.docx”))
HttpContext.Current.Response.WriteFile(MyEncoder.HtmlEncode(docFilePath))
HttpContext.Current.Response.End()End Sub
-
AuthorPosts